$37,999

Bobcat S510 Skid Steer

Details
Make Bobcat
Model S510
Type Skid Steer
Hours 1116
Condition Very Good
Description

Bobcat S510 Skid Steer, Kubota 48.9 HP, 4WD, Interim Tier 4, Diesel, Liquid Cooling, Fully Hydrostatic, Operating Capacity 1,650 lb, 1116 Hours, All Maintenance Points Serviced. Ready to Work!

(NOTE: AVAILABLE ONLY VIA APPOINTMENT. PLEASE GET IN TOUCH AND SCHEDULE AN APPOINTMENT.)

Engine

  • Make: Kubota
  • Model: V3307-DI-TE3
  • Engine Tier: Interim Tier 4
  • Fuel: Diesel
  • Cooling: Liquid
  • Horsepower: ISO 9249 EEC / SAE J1349 Net - 46.1 hp at 2700 rpm| ISO 14396 Gross - 46.1 hp at 2700 rpm | SAE J1995 Gross - 48.9 hp at 2700 rpm
  • Torque: ISO 9249 EEC / SAE J1349 Net - 109.6 ft-lb at1600 rpm | SAE J1995 Gross - 117.0 ft-lb at 1600 rpm
  • Low Idle rpm: 1075 - 1225
  • High Idle rpm: 2760 - 2900
  • Number of Cylinders: 4
  • Displacement: 2.4L
  • Bore| Stroke: 3.425 in | 4.03 in
  • Lubrication: Gear Pump Pressure System with Filter
  • Crankcase Ventilation: Closed Breathing
  • Air Cleaner: Dry replaceable paper cartridge with separate safety element
  • Ignition: Diesel - Compression
  • Air Induction: Naturally Aspirated
  • Engine Coolant: Propylene Glycol / Water Mixture
  • Starting Aid: Glow Plugs - Automatically activated as needed in RUN position

Drive System

  • Main Drive: Fully hydrostatic, 4-wheel drive
  • Transmission: Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • Final Drive: Prestressed #80 HSOC endless roller chain (no master link) and sprockets in sealed chaincase with oil lubrication (Chains do not require periodic adjustments) Two chains per side with no idler sprocket
  • Axle Size: 1.98 in heat treated
  • Wheel Bolts: Eight - 9/16 in. wheel bolts fixed to axle hubs

Controls

  • Vehicle Steering: Direction and speed controlled by two hand operated steering levers or optional joystick(s)

Loader Hydraulics

- Lift and Tilt: Controlled by separate foot pedals or optional Advanced Control System (ACS) or optional Selectable Joystick Controls (SJC)
- Front Auxiliary: Controlled by electrical switch on Right Hand steering lever or joystick

  • Auxiliary Pressure Release: Pressure relieved through quick couplers; Push couplers in, hold for 5 seconds
  • Engine: Hand operated speed control, additional foot operated speed control pedal with SJC option; key-type start switch or optional Keyless Start Panel or optional Deluxe Instrumentation Panel and function error shutdown
  • Starting Aid: Glow plugs automatically activated as needed in RUN position
  • Service Brake: Two independent hydrostatic systems controlled by two hand operated steering
  • Secondary Brake: One of the hydrostatic transmissions
  • Parking Brake: Mechanical disc, manually operated switch on left instrument panel

Hydraulic System

  • Pump Type: Engine driven, gear type
  • Pump Capacity: 17.1 U.S. gpm
  • System Relief at Quick Couplers: 3450 - 3550 psi
  • Filter (Hydraulic / Hydrostatic): Replaceable beta 10 micron = 200, drop in element
  • Filter (Charge): Replaceable beta 10 micron = 200, drop in element

Hydraulic Cylinders

-Bore Diameter: Lift Cylinder (2) - 2.25 in | Tilt Cylinder (2) - 2.75 in

-Rod Diameter: Lift Cylinder (2) - 1.50 in | Tilt Cylinder (2) - 1.50 in

-Stroke: Lift Cylinder (2) - 27.50 | Tilt Cylinder (2) - 13.02 in

  • Control Valve - Standard: 3-Spool, open center, manually operated with spring detent for lift float; Electrically controlled auxiliary spool
  • Control Valve - ACS and SJC: 3-Spool, open center with electric actuator controlled lift with float and tilt; Electrically controlled auxiliary spool
  • Fluid Lines: SAE Standard tubelines, hoses, and fittings
  • Fluid Type: BOBCAT FLUID, Hydraulic / Hydrostatic | 6903117 - (Two - 2.5 U.S. gal) | 6903118 - (5 U.S. gal)  | 6903119 - (55 U.S. gal)

Hydraulic Function Time

- Raise Lift Arms: 3.3 seconds

- Lower Lift Arms: 2.8 seconds

- Bucket Dump: 2.3 seconds

- Bucket Rollback: 1.7 seconds

Capacities

  • Fuel: 24.75 U.S. gal
  • Engine Oil with Filter Change: 9.2 qt
  • Engine Cooling System: with Heater - 3.1 U.S. gal | without Heater - 3.0 U.S. gal
  • Hydraulic | Hydrostatic Reservoir: 2.0 U.S. gal
  • Hydraulic | Hydrostatic System: 8.4 U.S. gal
  • Chaincase Reservoir: 8.5 U.S. gal