Kubota BX23S Tractor

Sold

Kubota BX23S Compact Tractor with Backhoe, Loader & Box Scraper. Unit is less than a year old in like new condition and comes backhoe, loader and box scraper. Unit has only 12.8 hrs of use! 

Includes

• BT603 Backhoe
• LA340 Loader
• Land Pride BB1248 Box Scraper
• Land Pride Forklift Attachments for Loader

Engine

• Make: Kubota
• Model: D902
• HP: 21.6 @3200 rpm
• PTO HP: 17.7 @3200 rpm
• Displacement: 898 cc
• Fuel Tank Capacity: 6.6 gal

Drive Train

• Transmission: HST, High-Low Gear Shift (2 Forward/Reverse)
• Drive Method: 4WD
• Brakes: Wet Disc
• PTO: Live Independent PTO (with hydraulic clutch)

                     Rear: STD (540 rpm)

                     Mid: STD (2500 rpm)

Hydraulics

• Pump Output: 6.2 gpm
• Lift Capacity @ 24" Behind Pin: 680 lbs
• Steering: Hydrostatic Power Steering

Tire Size - Turf/Bar/Industrial

• Front: 18x8.5-10 / N.A. / 18x8.5-10
• Rear: 26x12-12 / N.A. / 26x12-12

Traveling Speeds at Rated Engine RPM (Turf)

• Forward - 0-8.4 mph
• Reverse: 0-6.5 mph 

Backhoe Specifications

• Model: BT603
• Bucket Cylinder Digging Force: 1936 lbf
• Dipperstick Cylinder Digging Force: 1171 lbf
• Boom Swing Mechanism: One Cylinder
• Shipping Weight (12"Bucket): 607 lbs
• Transport Height: 67.7"
• Loading Height: 5' 
• Digging Depth: 6'1"
• Swing Pivot to Rear Axle Center Line: 28.6"
• Reach From Swing Pivot: 8'7"
• Bucket Rotation: 180 Degrees
• Swing Arc: 140 Degrees
• Angle of Departure: 20.1 Degrees

Loader Specifications: 

• Model: LA340 Pin-on
• Max Life Height (To Bucket Pivot Pin) 71"
  
• Dumping Clearance: 52.1"
• Dumping Reach at Max Lift Height: 25.4"
  
• Maximum Dump Angle: 45 Degrees
• Reach with Bucket on Ground: 54.8"
• Bucket Rollback Angle: 29 Degrees
• Digging Depth: 4.9"
• Bucket Width: 48"
• Lift Capacity (500mm fwd, max hight): 509 lbs
• Lift Capacity (pivot pin, max height): 739 lbs
• Breakout Force (500mm fwd): 987 lbf
• Raising Time / Lowering Time (w/o load) second: 3.3 / 2.5
• Bucket Rollback Time / Dumping Time Second: 2.3 / 2.7

Box Scraper Specifications

• Model: BB1248
• Working Width: 48"
• Capacity: 9.4 cu. ft.
• Weight: 316 lbs
• Number of Shanks: 4
• Shank Material: 3/4 x 2-1/2" x 15" Heat Treated Spring Steel
  
• Vertical Shank Positions: 2-1/4" x Above Scraper End Plates| 2-3/4" Below Scraper End Plates
• Shank Tip Construction: Replaces Heat Treated Dimpled-On Tips
• Shank Beam: 4" x 4" x 1/4" Manufactured Shank Tube
• Shank Lift Mechanism: Manual lift with spring retainer at each shank
• Moldboard: Bumped-formed moldboard 15 3/8" vertical height
• Side Panels: 3/16" thick x 16" high x 24" deep
• Depth of Bucket: 23-1/8"
• Bucket Reinforcement: Two welded braces to rear of bucket 
• Cutting Blades: 2 ea. 3/8" x 6" high carbon, heat treated cutting edges; reversible and
  replaceable
• Maximum H.P. Rating: 30 Hp
• A-Frame Material: 1/2" x 3"
• 3-Point Hitch Type: Double strap lower hitch
  Cat. I (Fits Land Pride Quick Hitch)